Cat. No. 702 Dolby Digital Soundhead
Print-friendly version 
Construction
Die-cast aluminum with matte black finish
Projector Compatibility
The Cat. No. 702 can be mounted directly on some projector models, while others require an adapter plate. For information on specific projectors, contact your Dolby representative.
Connecting Cable
10-meter (32.8-foot) high-quality video cable included
Prewired 12-pin male Molex® connector for Cat. No. 702 output, 25-pin male D-connector for Dolby Digital processor input
Optional 15-meter (49-foot) cable: Dolby Part No. 83237
Optional 30-meter (98-foot) cable: Dolby Part No. 83142
Power Requirements
Draws operating power from Dolby cinema processor via interconnecting video cable; no adjustments or other wiring required
Dimensions and Weight
150 × 175 × 275 mm (5.9 × 6.9 × 10.8 inches)
Net: 5 kg (11 lb)
Environmental Conditions
Operating: 0°C to 40°C (32°F to 104°F),
Nonoperating (storage): 0°C to 85°C (32°F to 185°F)
Humidity: 20% to 80% relative, noncondensing
Regulatory Notices
North America: This unit complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules, and Industry Canada ICES-003 specifications.
Europe: This unit complies with the requirements of EMC Directive 89/336/EEC and carries the CE marking accordingly.
Warranty
One-year limited, parts and labor; see disclaimer below.
Specifications subject to change without notice.
Disclaimer of Warranties
Equipment manufactured by Dolby Laboratories is warranted against defects in materials and workmanship for a period of one year from the date of purchase. There are no other express or implied warranties and no warranty of merchantability or fitness for a particular purpose, or of noninfringement of third-party rights (including, but not limited to, copyright and patent rights).
Limitation of Liability
It is understood and agreed that Dolby Laboratories' liability, whether in contract, in tort, under any warranty, in negligence, or otherwise shall not exceed the cost of repair or replacement of the defective components or accused infringing devices, and under no circumstances shall Dolby Laboratories be liable for incidental, special, direct, indirect, or consequential damages (including, but not limited to, damage to software or recorded audio or visual material), cost of defense, or loss of use, revenue, or profit, even if Dolby Laboratories or its agents have been advised, orally or in writing, of the possibility of such damages.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. Surround EX is a trademark of Dolby Laboratories. Molex is a trademark of Molex, its affiliates, related companies, licensors, and/or joint venture partners.
