The NA10 interfaces digital cinema equipment with your theatre’s existing automation system.
The Dolby® NA10 Network Automation Interface makes it easy to interface digital cinema playback equipment with existing cinema control systems, enabling fully automated presentations.
Extensive input and output capabilities enable digital cinema equipment to be linked to existing lighting, curtain, automation, and other ancillary systems. The unit turns network control from the digital cinema playback system into relay closures, mains switching, and serial control for driving existing equipment. The unit can be connected in parallel with existing film automation systems making it easy to switch between film and digital shows, and even to run seamless presentations mixing both film and digital content. An offline button enables cinema control to be handed over completely to an existing film automation system at any time.
Advanced features include 12 configurable momentary/latching outputs, plus eight inputs that can be used for tally signals and to automatically trigger individual cues or predefined cue sequences. For easy interfacing to existing equipment, two mains voltage relays are provided to drive slide projectors and other devices that do not feature low-voltage control. Front-panel indicators are provided for all inputs and outputs, ensuring that system status is clearly visible at all times.
The unit is easy to install and can be wall or rack mounted for wiring convenience. Conduit knockouts are provided to aid conformance with local electrical wiring regulations.
ENLARGE 
NA10 Front Panel
Power Button
Latched, recessed to prevent accidental operation, with LED indicator
Online/Offline Button
Controls response to network commands Recessed to prevent accidental operation, with LED indicator
LED Indicators
Network connection, general-purpose input, and relay output status
Serial Port
9-pin female D-connector, for installer configuration and software upgrade
USB 2.0 Port
Type B connector, for installer configuration and software upgrade
NA10 Internal Connections
General-Purpose Inputs
Eight low-voltage inputs
Screw terminals
2 V or 8 V logic switching threshold
General-Purpose Outputs
Twelve low-voltage relay outputs
Screw terminals
Normally closed and normally open contacts 1A, 32 VDC max
Replaceable relays
Two mains voltage relay outputs
Screw terminals
5A 250 VAC max, 50–60 Hz, protected by resettable circuit breakers
Replaceable relays
Cinema Processor Fader Control
Screw terminals
Switch selects processor model
Serial Ports
10-pin header, RS-485, DMX-512 compatible
Network Connection
RJ-45 female connector 10Base-T
Construction: Industrial chassis, screw closure, knockouts for wiring conduit Suitable for wall mounting (optional rack-mounting kit available)
Power Requirements: 100–240 VAC, 50–60 Hz, 20 W from a centrally switched power source
Dimensions and Weight: 445 × 216 × 100 mm (17.5 × 8.5 × 4 inches) 6 kg (13 lb)
Environmental Conditions: Operating: 0° to 40°C (32° to 104°F), 20 to 80 percent relative humidity (noncondensing)
NA10
Specifications Sheets
Technical Papers